xIO Stage 4×4
- Premium 4 IN x 4 OUT Dante digital snake.
- Neutrik metal body DL series XLR connectors.
- 14 gauge A1008 steel construction.
- Easy Installation
- Wall or floor mounted.
- Easily mounts in 8″ x 8″ x 4″ NEMA Junction Box with 7″ opening.
Analog Inputs
|
Frequency Response |
20 Hz – 20 kHz, ± 0.5 dB. |
|
Channel Separation |
> 110 dB @ 1 kHz, +24 dBu. |
|
Connectors |
Female Neutrik metal body DL series XLR connectors. |
|
Number of Inputs |
Four (4) switchable balanced mic or line level. |
|
Nominal Input Level |
+4 dBu with 20 dB of headroom (digital). |
|
Maximum Input Level |
+23 dBu (1% distortion). |
|
Mic pre-amp gain |
0, 12, 24, 44 or 54 dB switchable. |
|
Mic pre-amp EIN |
< -125dB with 150 ohm source impedance. |
|
CMRR |
> 76 dB @ 1 kHz, unity gain. |
|
Input Impedance |
8k Ohms balanced, 4k Ohms unbalanced. |
|
Phantom Power (per input) |
+48 VDC 10 mA maximum. |
|
Dynamic Range |
> 116 dB, A-weighted. |
|
THD + Noise |
< -100 dB, unweighted; 1 kHz @ +16 dBu with 0 dB gain. |
|
ADC Latency |
0.30 mS. |
Mechanical Specifications
|
Space Required |
Minimum requirement of 8”x8”x4” electrical enclosure with 7" opening. |
|
Electrical |
PoE IEEE 802.3af Class 0, 10 Watts maximum. |
|
Certification of Compliance |
UL 60065, cUL 60065, IEC 60065, FCC 15.109, FCC 15.109(g), FCC 15.107, EN 55032, EN 55103-2, EN 61000-3-3, EN 61000-3-2, ICES-003, RoHS. |
|
Shipping Weight |
3.7lbs (1.678kg) |
Analog Outputs
|
Frequency Response |
20 Hz – 20 kHz, ± 0.5 dB. |
|
Channel Separation |
> 110 dB @ 1 kHz, +24 dBu. |
|
Connectors |
Male Neutrik metal body DL series XLR connectors. |
|
Number of Outputs |
Four (4) balanced line level. |
|
Nominal Output Level |
+4 dBu with 20 dB of headroom. |
|
Maximum Output Level |
+24 dBu (+22.8 dBu into a 2k Ohm minimum load). |
|
Output Impedance |
300 Ohms balanced, 150 Ohms unbalanced. |
|
Dynamic Range |
> 116 dB, A-weighted. |
|
THD + Noise |
< -94 dB, unweighted; 1 kHz @ +20 dBu with 0 dB gain. |
|
DAC Latency |
0.60 mS. |
System
|
Sampling Rate |
48 kHz. |
|
Dante Cable |
Standard CAT6, maximum device-to-device length = 100 meters. |
|
Latency |
1.92 mS (input to output, 1mS Dante latency). |
Architect and Engineer Specifications: xIO Stage 4×4
The xIO Stage 4×4 shall provide four XLR analog mic/line inputs that are adjustable from line to mic level with coarse gain and phantom power and four XLR analog line outputs. Levels and phantom power shall be controllable via DSP modules in software. Network audio expansion shall be provided by the Dante protocol. The connector shall be 100 Base-T RJ45 utilizing CAT6 cable. A designer software application shall be provided that operates on a Windows computer, with network interface installed, running Windows® 7 or higher operating system. Computer connection for configuration shall be via a hosting DSP unit’s rear panel Ethernet connector that communicates with the devices via Dante. The front panel shall include indicators for POWER, ETHERNET, and AUDIO BUS. Audio conversion shall be 24-bit, 48 kHz and the dynamic range shall not be lower than 112 dB, A-weighted with a maximum input level of +23 dBu and maximum output level of +24 dBu. The device shall meet UL/CSA and CE safety requirements and comply with CE and FCC Part 15 emissions limits. The device shall be RoHS compliant. The chassis shall be constructed of cold rolled steel and is designed to mount in a standard 8”x8”x4” NEMA junction, pull, or switch box. The device shall be a Symetrix xIO Stage 4×4.
